| ■ Exclusive Free-Flow Design |
Competitive plate heat exchanger designs claim wide-gap |
|
| advantages, but pinch points in their design can block flow |
| and create slurry buildup. The Free-Flow's channels handle |
| bigger particles and require less maintenancebecause they |
| are a constant width. |
| |
| |
| |
| |
| |
|
|
| |
| ■ Specifications |
PLATE HEAT EXCHANGER |
MODEL |
HEIGHT(m/m) |
WIDTH(m/m) |
TYPICAL LENGTH(m/m) |
STANDARD CONNECTION SIZE(in.) |
AT4
|
|
186 |
305∼501 |
1(in.) |
AT10
|
924 |
279 |
368∼ 1283 |
2(in.) |
AT20
|
1340 |
441 |
508∼4048 |
3(in.) |
AT402
|
937 |
533 |
521∼4051 |
4(in.) |
AT405
|
1426 |
533 |
521∼4061 |
4(in.) |
AT40
|
1794 |
533 |
860∼4061 |
4(in.) |
AT805
|
1603 |
749 |
879∼4080 |
6(in.) |
AT80
|
2289 |
749 |
879∼4080 |
6(in.) |
AT1306
|
2161 |
941 |
1289∼4489 |
10(in.) |
AT1309
|
2527 |
941 |
1289∼4489 |
10(in.) |
AT130
|
2721 |
941 |
1289∼4489 |
10(in.) |
AT180
|
3220 |
1372 |
1880∼4166 |
14(in.) |
AT2508
|
3048 |
1448 |
1651∼6223 |
16(in.) |
AT250
|
3404 |
1448 |
1651∼6223 |
16(in.) |
AT161FF
|
1807 |
610 |
854∼4061 |
3(in.) |
AT40FF
|
1784 |
686 |
860∼4061 |
4(in.) |
AT184FF
|
2162 |
749 |
879∼4080 |
8(in.) |
AT192FF |
2839 |
1307 |
1289∼4489 |
12(in.) |
|
Based on selection: Design pressure up to 350 psi(24.6kg/cm2) (full differential pressure rating).
Design temperature up to 4100 F ( 2100C).
ASME code standard available. |
| |
FREE-FLOW CONNECTIONS AND PRESSURES |
MODEL |
STUDDED PORT SIZE*(in.) |
OPERATING PRESSURES+ |
AT161FF
|
3 |
up to 86 psig (6.9 bar)(6kg/cm2) |
AT40FF
|
4 |
up to 150 psig (11.3 bar)(10.5kg/cm2) |
AT184FF
|
8 |
up to 86 psig (6.9 bar)(6kg/cm2) |
AT192FF |
12 |
up to 86 psig (6.9 bar)(6kg/cm2) |
|
MATERIALS OF CONSTRUCTION |
PLATES |
GASKETS |
T304 stainless steel
|
Nitrile (NBR) |
T316 stainless steel
|
Ethylene Propylene Rubber (EPDM)
|
Titanium
|
Silicone
|
Avesta SMO 254
|
Viton
|
Hastelloy
|
Butyl (Resin Cured)
|
Nickel
|
Hypalon |
Incoloy |
|
|
* Standard studded port-type connections provide maximum cost effectiveness and are available from stock.
Lap joint and weld-neck flanged connections are available at additional cost with longer delivery.
+ Temperatures up to 3000F(148.900C) are available on all models. |
|
|
Gasket Plate Heat Exchanger 
